PRODUCTOS

Sistemas de Dispensado Selectivo de Conformal

FCS300

FCS300 Spray Valve

Valves

FCS300

Spray Valve

The FCS300 Spray Valve provides a repeatable, concentrated coating film in pattern widths ranging from 0.25” to over 2”. The atomized spray process resulting from the FCS300 will produce conical (round cap) or fan-shaped (flat cap) patterns with transfer efficiencies in excess of 99%.

The FCS300 Spray Valve provides a repeatable, concentrated coating film in pattern widths ranging from 0.25” to over 2”. The atomized spray process resulting from the FCS300 will produce conical (round cap) or fan-shaped (flat cap) patterns with transfer efficiencies in excess of 99%. The FCS300 features a micrometer flow adjustment that makes fine tuning of your process easier than ever.

The FCS300 has many integrated features including:

  • Low pressure, low volume atomized process
  • 300 series stainless steel fluid body for superior material compatibility
  • Interchangeable spray cap offers fan and oval-shaped patterns
  • Micrometer flow adjustment with lock nut
  • Divorced valve design prevents contamination of the air section
  • Compatible with all commercially available conformal coatings
  • Wide viscosity range offers versatility for virtually any spray application

image

VALVE SPECIFICATIONS

Dimensions
168.4 mm x 22 mm x 22 mm
(6.63 in x 0.866 in x 0.866 in)

Weight
9 oz

Viscosity Range
1 cps – Paste

Operating Air Pressure
60 – 100 psi

Maximum Inlet Fluid Pressure
2500 psi

Wetted Components
Stainless steel, Teflon®, Kalrez®

Transfer Efficiency
99%

Spray Pattern Width (Round Cap)
0.25 in – 1 in

Spray Pattern Width (Flat Cap)
0.75 in – 2 in+

 

PVA also offers the following products to improve your dispensing application:

FCS3-SP FCS300 spare parts kit
V317 Flat spray cap
V318 Round spray cap


Teflon® and Kalrez® are registered trademarks of Dupont.

Share/Bookmark